The structure and morphology of nanowires depend on the preparation parameters such as the electrolyte concentration, the electrodeposition time and the interval time, the electropotential, the pore diameter, and channel morphology of the template [46, 47]. Synthesis of Cu NCs Figure 7 gives the FESEM images of sample Cu1. Figure 7 FESEM images of sample Cu1. (a) middle part of cross-section, (b) the end of cross-section. Figure 7 indicates that most nanochannels were
filled by Cu nanowires with a diameter of 120 nm. The diameter is larger than the pore diameter of OPAA template because the nanowire is composed of Cu core and Al2O3 shell where the core is from Cu nanowire and the shell is from the pore wall of the OPAA template. Figure 8 gives the XRD pattern and the current-time curve of sample Cu1 Figure 8 XRD pattern (a) and the current-time APR-246 ic50 curve (b) of sample Cu1. There diffraction peaks in Figure CP673451 in vivo 8a can be indexed as (111), (200), and (220) diffraction planes of fcc Cu, respectively, which further
demonstrates that sample Cu1 is composed of metallic Cu. The current rises abruptly at time zero to charge the double layer, subsequently, the current rises slowly with a little variation because Cu2+ ions diffuse slowly through the branched channel of OPAA template near the barrier layer. The current further increases with a higher rate after 100 s because some nanowires in branched channels grow into main pore channels of the template where Cu2+ ions have a higher diffusion rate. Figure 9 gives the FESEM images and XRD pattern of sample Cu4. Figure 9 FESEM images and XRD pattern of sample Cu4. (a) Top view with EDS spectrum, Parvulin (b) cross-sectional view with
a low magnification, (c) local magnified image, (d) XRD pattern. Figure 9a indicates that nearly all pores of the template were filled by Cu nanowires. The cross-sectional images, as shown in Figure 9b, c, indicate that the template has a thickness of 11 μm, and only 5.5-μm pore channels near the barrier layer were filled by Cu nanoparticles with long-axis diameters of 40 to 105 nm, which formed Cu nanoparticle nanowires in the pore channel. Figure 9d further demonstrates that the nanoparticle nanowires are composed of fcc Cu metal with a calculated grain size of 33 nm based on Scherrer’s formula. Similar to Ag nanowires, Cu nanowires prepared by continuous electrodeposition are single-crystalline with smooth surface and nearly uniform diameter, and Cu nanowires prepared by interval electrodeposition are polycrystalline with bamboo-like or pearl-chain-like structure. Selumetinib manufacturer optical properties of metallic NCs/OPAA Figure 10 gives optical absorption spectra of samples Ag1, Ag2, Ag3, Ag4, and Ag5, and samples Cu2, Cu3, and Cu4. Figure 10 Optical absorption spectra (a) samples Ag1 and Ag2; (b) Ag3, Ag4, and Ag5; (c) Cu2, Cu3, and Cu4.